2-36
Confidential
No Tray T2 -
The T2 paper feed sensor
detected that the T2 paper tray
unit is open in printing by feeding
paper from the T3 paper tray unit.
(after the registration of printing in
the engine)
8506 2-68
The T2 paper feed sensor
detected that the T2 paper tray
unit is open in printing by feeding
paper from the T3 paper tray unit.
(before the registration of printing
in the engine)
8502 2-68
No Tray T3 -
While the T3 paper tray unit is
open state, print or adjustment
operation was attempted.
8403 2-67
No Waste
Toner
Install the Waste
Toner Box.
The waste toner sensor detected
that no waste toner box was set.
6300 2-58
Out of
Memory
Press Stop [x].
The memory is insufficient to
expand the data of PC-Print.
C700 2-81
Print Data
Full
Secure Print Data
is full. Press Stop
[x] and delete the
previously stored
data.
The memory used to store
secure print data exceeded the
memory size for secure print
data.
C800 2-81
Prinit Unable
**
Turn the power off
and then back on
again.
Error related to print
Refer to the error code of “**”.
**
Registration
Registration failed.
Insufficient Toner
for Registration.
Dot counter or develop roller
counter of color toner has
reached the upper limit during
auto color registration performed
from the control panel.
9A02 2-78
Registration failed.
Press [Retry], and
try again.
Error occurred during patch data
printing in auto color registration
performed from the control panel.
9A03 2-79
Registration failed.
Turn the power off
and then back on
again.
Error occurred with the value
measured during auto color
registration performed from the
control panel.
9A01 2-78
Error Message
State
Error
Codes
Refer
to:
Upper line Middle line
To Next Page
Loading...
