2-38
Confidential
Size Error
Specify the correct
paper size for Tray
1.
For printing by feeding paper
from the paper tray 1, the size of
paper specified from the driver
set the size which was not
supported by the paper tray 1.
9702 2-75
Specify the correct
paper size for Tray
2.
For printing by feeding paper
from the T2 paper tray unit, the
size of paper specified from the
driver set the size which was not
supported by the T2 paper tray
unit.
9703 2-75
Specify the correct
paper size for Tray
3.
For printing by feeding paper
from the T3 paper tray unit, the
size of paper specified from the
driver set the size which was not
supported by the T3 paper tray
unit.
9704 2-75
Size Error
2-sided
Press Stop[x].
Specify the correct
paper and load the
same size paper as
the Printer driver
setting.
For 2-sided printing, the tray
whose paper size was not
supported by 2-sided printing
was selected.
9701 2-75
Specify the correct
paper and press
[Retry].
The registration rear sensor
detected that the fed paper was
larger or smaller than the
specified size in 2-sided printing.
8A01 2-69
Size
Mismatch
Reload correct
paper in Tray1,
then press [Retry].
The size of paper loaded in the
paper tray 1 and the one
specified from the driver are not
same when paper is fed from the
paper tray 1.
9002 2-71
Reload correct
paper in MP Tray,
then press [Retry].
The size of paper loaded in the
MP tray and the one specified
from the driver are not same
when paper is fed from the MP
tray.
9001 2-71
Reload correct
paper in Tray2,
then press [Retry].
The size of paper loaded in the
T2 paper tray unit and the one
specified from the driver are not
same when paper is fed from the
T2 paper tray unit.
9003 2-71
Reload correct
paper in Tray3,
then press [Retry].
The size of paper loaded in the
T3 paper tray unit and the one
specified from the driver are not
same when paper is fed from the
T3 paper tray unit.
9004 2-71
Error Message
State
Error
Codes
Refer
to:
Upper line Middle line
To Next Page
Loading...
