EasyManua.ls Logo

Brother HL-L9300CDW - Page 59

Brother HL-L9300CDW
391 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-39
Confidential
Small paper
Open the Back
Cover and then
press [Retry].
The paper size which is not
supported by the output tray is
set for printing from the printer
driver.
8D02 2-70
Supplies
Belt End Soon
Number of pages printed with the
belt unit will reach the upper limit
soon.
4300 2-50
Drum End Soon.
Number of the drum unit rotations
reaches the upper limit soon.
4000 2-49
Replace Belt
Number of pages printed with the
belt unit has reached the upper
limit.
4400 2-50
Replace Drum
Number of the drum unit rotations
has reached the upper limit.
4200 2-49
Toner Low
Dot counter of the toner cartridge
(Black) or develop roller counter
reaches the upper limit soon.
4B01 2-51
Dot counter of the toner cartridge
(Cyan) or develop roller counter
reaches the upper limit soon.
4B04 2-51
Dot counter of the toner cartridge
(Magenta) or develop roller
counter reaches the upper limit
soon.
4B03 2-51
Dot counter of the toner cartridge
(Yellow) or develop roller counter
reaches the upper limit soon.
4B02 2-51
WT Box End Soon
The waste toner sensor detected
that the waste toner box is almost
full.
4700 2-51
Toner Error
One or more Toner
Cartridges are not
detected. Pull out
and reinsert all 4
Toner Cartridges.
The develop release sensor
detected the developer roller
disengagement or engagement
failure.
6E00 2-61
Too Many
Trays
Turn the power off
and remove
additional trays.
The number of option trays
higher than the specified one is
connected.
6D00 2-61
Touchscreen
initialization
failed
Remove any
material which is
on the
touchscreen.
Error occurred during touch panel
initialization.
D800 2-82
Error Message
State
Error
Codes
Refer
to:
Upper line Middle line

Table of Contents

Other manuals for Brother HL-L9300CDW

Related product manuals