General Information
86
3
1
### means a number within the range of 000 to 255. On connection to the network, if the machine’s ‘Boot Method’ is ‘Auto’ the machine will attempt
to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA
IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’ you will need to manually
enter an IP address from the machine’s control panel.
WLAN
(Continued)
WLAN Status
(Appears only
when
WLAN Enable
is On and
Wired Enable
is Off.)
Status Active(11n) /
Active(11b) /
Active(11g) /
Wired LAN Active /
WLAN OFF / AOSS Active /
Connection Fail
Shows the wireless Ethernet
link status.
Signal Strong / Medium / Weak /
None
Shows the signal condition.
Channel - Shows the channel in use when
Status is Active.
Speed - Shows the connecting speed
when Status is Active.
SSID - Shows SSID [uses a maximum
of 32 digits and characters 0-9,
a-z and A-Z in ASCII values]
Comm. Mode Ad-hoc / Infrastructure Shows the current
Communication Mode.
MAC Address
- - Shows the MAC address of the
machine.
Set to Default
Restores the wireless network settings of the internal print server to the factory default.
WLAN Enable
- On / Off* Turns the wireless interface on
or off.
Security IPsec - On / Off* IPsec is an optional security
feature of the IP protocol that
provides authentication and
encryption services. We
recommend that you contact
your network administrator
before changing this setting.
Network
Reset
Restores all network settings of the internal print server to the factory default.
Reset Menu
Display Shows Description
Network Restores all network settings of the internal print server to the factory default.
Factory Reset Resets the machine and restores the printer settings (including command settings) to the
factory default settings.
Network Menu (continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
The factory settings are shown in Bold with an asterisk.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
