General Information
92
3
Ecology features 3
Ink Save 3
You can save ink using this feature. When you set Ink Save to On, printed items appear lighter. The default
setting is Off.
a Press Menu.
b Press a or b to choose General Setup. Press OK.
c Press a or b to choose Ecology. Press OK.
d Press a or b to choose Ink Save. Press OK.
e Press a or b to choose On or Off. Press OK.
f Press Cancel to return to Ready mode.
Sleep Time 3
The Sleep mode setting can reduce power consumption. When the machine is in Sleep Mode (Power Save
mode) it acts as though it were turned off. The machine will wake up and start printing when it receives a print
job.
You can choose how long the machine must be idle before it goes into Sleep mode. When the machine
receives a print file or document, the timer will be reset. The default setting is 3 minutes. While the machine
is in Sleep mode the LCD will show Sleep.
a Press Menu.
b Press a or b to choose General Setup. Press OK.
c Press a or b to choose Ecology. Press OK.
d Press a or b to choose Sleep Time. Press OK.
e Enter the length of time the machine will remain idle before entering Sleep mode. Press OK.
f Press Cancel to return to Ready mode.
Deep Sleep mode 3
If the machine is in Sleep mode and does not receive any jobs for a certain length of time, the machine will
go into Deep Sleep mode automatically and the LCD will show Deep Sleep. Deep Sleep mode uses less
power than Sleep Mode. The machine will wake up, when the machine receives a print job.
If a wireless network is enabled or an optional card reader is connected, the machine will not enter Deep
Sleep mode.
To disable the wireless network uu Network User’s Guide: Control panel setup
To Next Page
Loading...
Need help?
General
Weight and Dimensions
