Chapter 3
26
Setting the Dim Timer for the
backlight 3
You can set how long the LCD backlight stays
on after the last key press.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose LCD Settings.
Press OK.
d Press a or b to choose Dim Timer.
e Press d or c to choose 10Secs,
20Secs, 30Secs or Off.
Press OK.
f Press Stop/Exit.
Setting the Off Timer 3
You can set how long the LCD stays on after
the last key press. This is a power saving
feature. The machine can print and scan from
your computer and receive faxes and voice
calls when the LCD is off.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose LCD Settings.
Press OK.
d Press a or b to choose Off Timer.
e Press d or c to choose 1Min, 2Mins,
3Mins, 5Mins, 10Mins, 30Mins or
Off.
Press OK.
f Press Stop/Exit.
Note
When the display is off you can press any
key to turn it back on.
To Next Page
Loading...
Need help?
General
