28
4
Memory Security 4
Memory Security lets you prevent
unauthorized access to the machine. You will
not be able to continue to schedule Delayed
Faxes or Polling jobs. However, any pre-
scheduled Delayed Faxes will be sent even if
you turn on Memory Security, so they will not
be lost.
While Memory Security is On, the following
operations are available:
Receiving faxes into memory (limited by
memory capacity)
Fax Forwarding (If Fax Forwarding was
already On)
Remote retrieval (If Fax Storage was
already On)
Cordless handset (MFC-885CW only)
• Making a call
• Receiving a call
• Viewing Caller ID (with subscriber
service)
While Memory Security is on, the following
operations are NOT available:
Printing received faxes
Sending faxes
Copying
PC printing
Scanning
PhotoCapture
PC Fax Receive
Cordless handset (MFC-885CW only)
• Intercom
• Transfer a call
• Register cordless handset
Operation from control panel
Note
• To print the faxes in memory, turn off
Memory Security.
• You must turn off PC Fax Receive before
you can turn on Memory Security. (See
Turning off Advanced Fax Operations
on page 70.)
• If you forget the Memory Security
password, please call your Brother dealer
for service.
Setting and changing the
memory security password 4
Note
If you have already set the password, you
will not need to set it again.
Setting a password for the first time 4
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Miscellaneous.
Press OK.
d Press a or b to choose Mem Security.
Press OK.
e Enter a 4-digit number for the password.
Press OK.
f When the LCD shows Verify:,
re-enter the password.
Press OK.
g Press Stop/Exit.
Security features 4
To Next Page
Loading...
Need help?
General
