80
13
How to copy 13
Entering Copy mode 13
When you want to make a copy, press
(Copy) to illuminate it in green.
The LCD shows:
1 No. of Copies
You can enter the number of copies you want
by using the dial pad.
Press a or b to scroll through the Copy key
options.
Quality (See page 81.)
Enlarge/Reduce (See page 81.)
Paper Type (See page 84.)
Paper Size (See page 84.)
Brightness (See page 83.)
Contrast (See page 84.)
RED Adjust (See page 84.)
GREEN Adjust (See page 84.)
BLUE Adjust (See page 84.)
Stack/Sort (See page 83.)
Page Layout (See page 82.)
Set New Default (See page 85.)
Factory Reset (See page 85.)
When the option you want is highlighted,
press OK.
Note
The default setting is Fax mode. You can
change the amount of time that the machine
stays in Copy mode after the last copy
operation. (See
Mode Timer on page 22
.)
Making a single copy 13
a Press (Copy).
b Load your document.
(See Loading documents on page 10.)
c Press Mono Start or Colour Start.
Making multiple copies 13
You can make up to 99 copies.
a Press (Copy).
b Load your document.
(See Loading documents on page 10.)
c Enter the number of copies you want.
d Press Mono Start or Colour Start.
Note
To sort the copies, press a or b to choose
Stack/Sort. (See Sorting copies using
the ADF on page 83.)
Stop copying 13
To stop copying, press Stop/Exit.
Making copies 13
COPY Copy Start Press
Normal
100%Enlarge/Reduce
Plain PaperPaper Type
100%Ratio:
Quality
01
1
To Next Page
Loading...
Need help?
General
