Receiving a Fax
43
6
Additional receiving
operations 6
Printing a reduced incoming
fax 6
If you choose On, the machine automatically
reduces each page of an incoming fax to fit on
one page of A4, Letter, Legal size paper. The
machine calculates the reduction ratio by
using the page size of the fax and your Paper
Size setting. (See Paper Size on page 23.)
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose
Auto Reduction.
e Press d or c to choose On (or Off).
Press OK.
f Press Stop/Exit.
Receiving faxes into memory
(Monochrome only) 6
As soon as the paper tray becomes empty
during fax reception, the LCD shows
No Paper Fed; put some paper in the paper
tray. (See Loading paper and other media
on page 15.) If you are unable to put paper in
the paper tray the following will happen:
If Memory Receive is On: 6
The machine will carry on receving the fax,
with the remaining pages being stored in
memory, if enough memory is available.
Further incoming faxes will also be stored into
memory until the memory is full. When the
memory is full the machine will stop
automatically answering calls. To print the
faxes, put paper in the tray.
If Memory Receive is Off: 6
The machine will carry on receiving the fax,
with the remaining pages being stored in
memory if enough memory is available. The
machine will then stop automatically
answering calls until paper is put in the paper
tray. To print the last fax you received, put
paper in the tray.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose
Memory Receive.
e Press d or c to choose On (or Off).
Press OK.
f Press Stop/Exit.
To Next Page
Loading...
Need help?
General
