39
6
6
Receive modes 6
You must choose a receive mode depending on the external devices and telephone services you
have on your line.
Choosing the Receive Mode 6
By default, your machine will automatically receive any faxes that are sent to it. The diagram below
will help you choose the correct mode.
For more detailed information on the receive modes, see Using receive modes on page 40.
To set a receive mode follow the instructions below.
a Press Menu.
b Press a or b to choose Initial Setup.
Press OK.
c Press a or b to choose Receive Mode.
d Press d or c to choose Fax Only, Fax/Tel, or Manual.
Press OK.
e Press Stop/Exit.
The LCD will display the current receive mode.
Receiving a Fax 6
Do you want to use the telephone features of your machine (if available) or
an external telephone or external telephone answering device connected
on the same line as the machine?
Yes
Fax Only
No
Yes
No
No
Manual
Yes
Fax/Tel
Are you using the voice message function of an external telephone
answering device?
Do you want the machine to answer fax and
telephone calls automatically?
Are you using the built-in TAD?
See Digital TAD.
No
Yes
* We recommend you set Fax Detect to On.
Manual*
To Next Page
Loading...
Need help?
General
