Brother MFC-795CW - Canceling a Sequential Polling Job; Sequential Polling (Black & White Only)

Polling
91
11
Sequential polling
(Black & White only) 11
Sequential polling lets you request
documents from several fax machines in one
operation. Afterwards, a Sequential Polling
Report will be printed.
a Press (Fax).
b Press d or c to display Polling RX.
c Press Polling RX.
d Press On (or Off).
e Press d or c to display Broadcasting.
f Press Broadcasting.
g Do one of the following:
 Press Add Number and enter a
number using the buttons on the
LCD.
Press OK.
 Press Speed Dial. Press to
choose Alphabetical Order or
Numerical Order. Press a or b to
select a number.
Press OK.
h After you have entered all the fax
numbers by repeating step g, press OK.
i Press Black Start.
The machine polls each number or
Group number in turn for a document.
Canceling a Sequential
Polling Job 11
a Press Stop/Exit.
b Do one of the following:
 To cancel the entire sequential
polling job, press
Entire Seq. Poll.
Go to step c.
 To cancel the current job, press the
button that displays the number
being dialed.
Go to step d.
 To exit without canceling, press
Stop/Exit.
c When the LCD asks if you want to
cancel the entire sequential polling job,
do one of the following:
 Press Yes to confirm.
 To exit without canceling, press No
or Stop/Exit.
d Do one of the following:
 To cancel the current job, press Yes.
 To exit without canceling, press No
or Stop/Exit.
# 01