34
5
Entering Fax mode 5
When the machine is idle, the time appears
on the LCD. When you want to send a fax, or
change fax send or receive settings, press
the (Fax) key to illuminate it in blue.
The LCD shows:
Press d or c to scroll through the Fax key
options. Some functions are only available
when sending black & white faxes.
Fax Resolution (See page 39.)
Contrast (See page 39.)
Broadcasting (See page 37.)
Preview (See page 36.)
Delayed Fax (See page 41.)
Batch TX (See page 41.)
Real Time TX (See page 40.)
Polled TX (See page 92.)
Polling RX (See page 90.)
Overseas Mode (See page 41.)
Glass ScanSize (See page 35.)
Set New Default (See page 42.)
Factory Reset (See page 42.)
Press the option you want.
Faxing from the ADF 5
a Press (Fax).
b Place the document face down in the
ADF. (See Using the ADF on page 21.)
c Enter the fax number using the dial pad.
You can also enter the fax number by
pressing Speed Dial. Press the
number or name you want and then
press Send a fax.
(For details, see How to Dial
on page 73.)
Note
You can preview a fax message before
sending it by setting Preview to On.
For details, see How to preview an
outgoing fax (Black & White only)
on page 36.
d Press Black Start or Color Start.
Note
• To cancel, press Stop/Exit.
• If you send a black & white fax when the
memory is full it will be sent in real time.
Sending a Fax 5
FAX/TEL
Speed Dial
Call History
Fax Resolution
Standard
Contrast
Auto
Broadcasting
Off
To Next Page
Loading...
Need help?
General
