Chapter 5
38
Canceling a Broadcast in
progress 5
a Press Stop/Exit.
b Do one of the following:
To cancel the entire broadcast, press
Entire Broadcast. Go to step c.
To cancel the current job, press the
button that displays the number
being dialed. Go to step d.
To exit without canceling, press
Stop/Exit.
c When the LCD asks if you want to
cancel the entire broadcast, do one of
the following:
Press Yes to confirm.
To exit without canceling, press No
or Stop/Exit.
d Do one of the following:
To cancel the current job, press Yes.
To exit without canceling, press No
or Stop/Exit.
Additional sending
operations
5
Sending faxes using multiple
settings 5
When you send a fax you can choose any
combination of these settings: resolution,
contrast, scan size, overseas mode, delayed
fax timer, polling transmission and real time
transmission.
a Press (Fax).
b Press d or c to display a setting you
want to change and press the setting,
then press the option you want.
c Repeat step b to change more settings.
Note
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by setting them as default.
These settings will stay until you change
them again. (See Setting your changes as
the new default on page 42.)
To Next Page
Loading...
Need help?
General
