Brother MFC-795CW - Volume Settings; Ring Volume; Beeper Volume

General setup
25
3
Volume Settings 3
Ring Volume 3
You can choose a range of ring volume
levels, from High to Off.
The machine will keep the new setting until
you change it.
Setting the Ring Volume from the
menu
3
a Press MENU.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display Volume.
e Press Volume.
f Press a or b to display Ring.
g Press Ring.
h Press Low, Med, High or Off.
i Press Stop/Exit.
Beeper Volume 3
When the beeper is on, the machine will beep
when you press a key, make a mistake or
after you send or receive a fax.
You can choose a range of volume levels,
from High to Off.
a Press MENU.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display Volume.
e Press Volume.
f Press a or b to display Beeper.
g Press Beeper.
h Press Low, Med, High or Off.
i Press Stop/Exit.