Troubleshooting and Routine Maintenance
115
c Lift the scanner cover to release the
lock. Gently push the scanner cover
support down and close the scanner
cover.
d Unplug the machine from the telephone
wall jack and take the telephone line
cord out of the machine.
e Unplug the machine from the AC power
outlet.
f Unplug the interface cable from the
machine, if it is connected.
g Wrap the machine in the bag and put it
in the original carton with the original
packing material.
h Pack the printed materials in the original
carton as shown below. Do not pack the
used ink cartridges in the carton.
Note
If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts and printed materials to use with
your ‘Exchange’ machine.
i Close the carton and tape it shut.
To Next Page
Loading...
Need help?
General
