Brother MFC-820CW User Manual

Chapter 3
22
d Press a or b to choose Letter,
Legal, A4, A5 or 4"x6".
Press OK.
e Press Stop/Exit.
Volume Settings 3
Setting the Ring Volume 3
You can turn the ring to Off or you can
choose the ring volume level. This setting will
stay until you change it again.
a Press d or c .
Setting the Ring Volume from the
menu
3
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Volume.
Press OK.
d Press a or b to choose Ring.
Press OK.
e Press a or b to choose Low, Med,
High or Off.
Press OK.
f Press Stop/Exit.
Setting the Beeper Volume 3
You can change the beeper volume. The
factory setting is Low. When the beeper is on,
the machine will beep when you press a key,
make a mistake or after you send or receive
a fax.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Volume.
Press OK.
d Press a or b to choose Beeper.
Press OK.
e Press a or b to choose Low, Med,
High or Off
Press OK.
f Press Stop/Exit.
Setting the Speaker Volume
3
You can adjust the machine's one-way
speaker volume.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Volume.
Press OK.
d Press a or b to choose Speaker.
Press OK.
e Press a or b to choose Low, Med,
High or Off.
Press OK.
f Press Stop/Exit.

Brother MFC-820CW Specifications

General

Brand	Brother
Model	MFC-820CW
Category	All in One Printer
Language	English