Brother MFC-820CW - Making N in 1 Copies or a Poster

Chapter 11
72
Making N in 1 copies or a
poster (page layout) 11
You can reduce the number of pages for
copies by using the N in 1 copy feature. This
allows you to copy two or four pages onto one
page, which lets you save paper.
You can also make a poster. When you use
the poster feature your machine divides your
document into sections, then enlarges the
sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
Note
• Make sure paper size is set to Letter or
A4.
•(P) means Portrait and (L) means
Landscape.
• You can only make one poster copy at a
time.
a Press (Copy).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Page Layout.
Press OK.
e Press a or b to choose Off,
2in1(P), 2 in 1 (L),
4in1(P), 4 in 1 (L)or
Poster(3x3).
Press OK.
f If you do not want to change additional
settings, press Black Start or
Color Start to scan the page.
If you are making a poster or placed the
document in the ADF, the machine
scans the pages and starts printing.
If you are using the scanner glass, go
to step g.
g After the machine scans the page, press
1 to scan the next page.
h Place the next page on the scanner glass.
Press OK.
Repeat steps g and h for each page of
the layout.
i After all the pages have been scanned,
press 2 to finish.
Note
•If Glossy has been chosen in the Paper
Type setting for N in 1 copies, the machine
will print the images as if Plain paper had
been chosen.
• If you are producing multiple color copies,
N in 1 copy is not available.
Place your document face down in the
direction shown below.
 2 in 1 (P)
 2 in 1 (L)
 4 in 1 (P)
 4 in 1 (L)
Poster (3 x 3) 11
You can make a poster size copy of a
photograph.