Brother MFC-820CW - Fax Redial; Outgoing Call; Search by Numerical Order

Quick-Dial Numbers and Dialing Options
49
7
Search by Numerical Order 7
You can use the Speed-Dial location to
search for names and numbers you have
stored in Speed-Dial memories.
a Press Search/Speed Dial.
You can also choose Speed-Dial by
pressing (Fax).
b Press a or b to choose
Numerical Order.
Press OK.
Note
•Press l to make the LCD font size larger.
•Press # to make the LCD font size smaller.
c Enter the first digit (1 to 8) of a 2-digit
Speed-Dial location, and then press a
or b to choose the name and number
you want to call.
(For example, enter 3 to start your
search at Speed-Dial location 30.)
Press OK.
Fax Redial 7
If you are sending a fax manually and the line
is busy, press Redial/Pause, and then press
Black Start or Color Start to try again. If you
want to make a second call to a number you
recently dialed, you can press Redial/Pause
and choose one of the last 30 numbers from
the Outgoing Call List.
Redial/Pause only works if you dialed from
the control panel. If you are sending a fax
automatically and the line is busy, the
machine will automatically redial once after
five minutes.
a Press Redial/Pause.
b Press a or b to choose the number you
want to redial.
Press OK.
c Press a or b to choose Send a fax.
Press OK.
d Press Black Start or Color Start.
Note
In Real Time Transmission the automatic
redial feature does not work when using
the scanner glass.
Outgoing Call 7
The last 30 numbers you faxed to will be
stored in the outgoing call history. You can
choose one of these numbers to send a fax,
add it to Speed-Dial, or delete it from the
history.
a Press Redial/Pause.
You can also choose Outgoing Call
by pressing (Fax).
b Press a or b to choose the number you
want to call.
Press OK.
c Do one of the following:
 To send a fax, press a or b to
choose Send a fax.
Press OK.
 If you want to store the number,
press a or b to choose
Add to Speed-Dial.
Press OK.
(See Storing Speed-Dial numbers
from Outgoing Calls on page 51.)
 Press a or b to choose Delete.
Press OK.
Then, confirm the Delete by
pressing 1.