26
4
Entering Fax mode 4
When the machine is idle the date and time
appear on the LCD. When you want to send
a fax, or change fax send or receive settings,
press the (Fax) key to illuminate it in
green.
The LCD shows:
Press a or b to scroll through the Fax key
options. Some functions are only available
when sending black & white faxes.
Fax Resolution (See page 29.)
Contrast (See page 29.)
Speed-Dial (See page 48.)
Outgoing Call (See page 49.)
Caller ID hist. (See page 50.)
Broadcasting (See page 28.)
Delayed Fax (See page 31.)
Batch TX (See page 31.)
Real Time TX (See page 30.)
Polled TX (See page 66.)
Polling RX (See page 65.)
Overseas Mode (See page 31.)
Scan Size (See page 27.)
Set New Default (See page 31.)
Factory Reset (See page 32.)
When the option you want is highlighted,
press OK.
Faxing from the ADF 4
a Press (Fax).
b Put the document face down in the ADF.
c Enter the fax number using the dial pad,
Speed-Dial or Search.
d Press Black Start or Color Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If the memory is full, the fax will be sent in
real time.
Sending a fax 4
09012345689
FAX
Fax Start
Press
Fax Resolution Standard
Contrast Auto
Speed-Dial
Outgoing Call
To Next Page
Loading...
Need help?
General
