Brother MFC-820CW - Page 147

Menu and Features
131
Fax ( ) C
Level1 Level2 Level3 Options Descriptions Page
Fax Resolution ——Standard*
Fine
S.Fine
Photo
Sets the resolution for
outgoing faxes.
29
Contrast ——Auto*
Light
Dark
Changes the lightness or
darkness of faxes you
send.
29
Speed-Dial ——Alphabetical
Order
Numerical Order
You can dial by pressing
only a few keys (and Start).
48
Outgoing Call Send a fax
Add to Speed-
Dial
Delete
— — You can choose a number
from the Outgoing Call
history and then send a fax
to it, add it to Speed-Dial, or
delete it.
49
Caller ID hist. Send a fax
Add to Speed-
Dial
Delete
— — You can choose a number
from the Caller ID history
and then send a fax to it,
add it to Speed-Dial, or
delete it.
50
Broadcasting Add Number
Complete
— — You can send the same fax
message to more than one
fax number.
28
Delayed Fax — — — Sets the time of day in
24-hour format that the
delayed faxes will be sent.
31
Batch TX ——On
Off*
Combines delayed faxes to
the same fax number at the
same time of day into one
transmission.
31
Real Time TX ——On
Off*
You can send a fax without
using the memory.
30
Polled TX ——On
Off*
Sets up your machine with
an document to be
retrieved by another fax
machine.
66
Polling RX ——On
Off*
Sets up your machine to
poll another fax machine.
65
Overseas Mode ——On
Off*
If you are having difficulty
sending faxes overseas,
set this to On.
31
The factory settings are shown in Bold with an asterisk.