Brother MFC-8510DW - User Manual

Questions and Answers:

C
Christopher RiceAug 30, 2025
How to activate wireless setting on Brother MFC-8510DW All in One Printer?
- M
  Mary RichmondAug 30, 2025
  To activate the wireless setting on your Brother All in One Printer, turn the wireless setting to ON. If a LAN cable is connected, disconnect it and then turn the wireless setting on. On your printer, press Menu, then 7 (Network), then 2 (WLAN), then 2 (Setup Wizard). When 'WLAN Enable ?' is displayed, choose 'On' and press OK. This will start the wireless setup wizard.
L
lmckenzieAug 29, 2025
What to do if wireless security information is incorrect on Brother All in One Printer?
- R
  Randy HamiltonAug 29, 2025
  If the wireless security information (Authentication method/Encryption method/Network Key) is incorrect on your Brother All in One Printer, reconfirm the wireless security information (Authentication method/Encryption method/Network Key). If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only.
J
Joseph TylerAug 29, 2025
How to fix incorrect SSID or Network Key on Brother All in One Printer?
- J
  joshua00Aug 29, 2025
  If the security information (SSID/Network Key) is incorrect on your Brother All in One Printer, reconfirm the SSID and security information (Network Key). If your router uses WEP encryption, make sure you enter the key used as the first WEP key, since your Brother machine only supports the use of the first WEP key.
L
Lauren SalazarAug 28, 2025
What to do if the wireless network and security setting is incorrect on Brother MFC-8510DW?
- D
  daniellelongAug 28, 2025
  If the wireless network and security settings entered are incorrect on your Brother All in One Printer, reconfirm the wireless network settings. Ensure the entered or selected SSID/authentication method/encryption method/UserID/Userpass are correct.
B
Brian LopezAug 28, 2025
What causes 'Document Jam' on my Brother All in One Printer?
- C
  christopher41Aug 28, 2025
  If your Brother All in One Printer displays 'Document Jam', the document was not inserted or fed correctly, or the document scanned from the ADF was too long.
R
Robert RodgersAug 31, 2025
Why does my Brother Software show 'Authenticate Err Wrong Date&Time'?
- H
  hendersonianAug 31, 2025
  If you're encountering an 'Authenticate Err Wrong Date&Time' error with your Brother Software, it's likely due to incorrect date and time settings on your machine. To resolve this, use the machine's control panel to correctly set the date, time, and time zone. Ensure these settings match those of the server providing authentication.
W
William QuinnAug 27, 2025
What to do if my Brother MFC-8510DW All in One Printer says 'Jam Inside'?
- R
  Rodney CannonAug 27, 2025
  If your Brother All in One Printer is displaying 'Jam Inside', it indicates that the paper is jammed inside the machine or the toner cartridge is placed in the machine without the drum unit. Put the toner cartridge into the drum unit, and then re-install the drum unit and toner cartridge assembly in the machine.
R
Robert BowenAug 27, 2025
How to fix 'Replace Toner' message on Brother MFC-8510DW All in One Printer?
- T
  Timothy ArmstrongAug 27, 2025
  If your Brother All in One Printer displays 'Replace Toner', the toner cartridge is at the end of its life, and the machine will stop all print operations. Replace the toner cartridge.
J
Julia VasquezAug 27, 2025
What does 'Toner Low' mean on my Brother MFC-8510DW All in One Printer?
- Q
  qclarkAug 27, 2025
  If your Brother All in One Printer displays 'Toner Low', the toner cartridge is near the end of its life. Order a new toner cartridge now, so a replacement will be available when the LCD shows 'Replace Toner'.
D
Dawn SolisAug 26, 2025
What to do if my Brother Printer 'Cannot Connect' because a device is already connected?
- S
  Steven WilkinsAug 27, 2025
  If your Brother printer displays 'Cannot Connect A device is already connected', it means another mobile device is already connected to the Wi-Fi Direct network when the Brother machine is the G/O (Group Owner). Wait for the current connection between your Brother machine and the other mobile device to shut down, and then try configuring the Wi-Fi Direct settings again.

Brother MFC-8510DW Specifications

General

Print Technology	Laser
Functionality	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Connectivity	USB, Ethernet, Wi-Fi
Automatic Duplex Printing	Yes
Paper Capacity	250 sheets
Automatic Document Feeder (ADF)	Yes
ADF Capacity	50 sheets
Scanning Resolution	1200 x 1200 dpi
Fax Speed	33.6 Kbps
Operating Systems	Windows, macOS, Linux
Mobile Printing	Brother iPrint&Scan, Google Cloud Print, AirPrint
Maximum Paper Size	Legal
Scan Type	Flatbed