Brother MFC-8710DW - Turning Secure Function Lock On;Off; Switching Users

Chapter 2
10
Turning Secure Function
Lock on/off 2
If you enter the wrong password, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning Secure Function Lock on
a Press Menu, 1, 8, 1.
18.Security
1.Function Lock
a Lock OffiOn
b Set Password
Select ab or OK
b Press a or b to choose Lock OffiOn.
Press OK.
c Enter your four-digit administrator
password.
Press OK.
Turning Secure Function Lock off
a Press Menu, 1, 8, 1.
18.Security
1.Function Lock
a Lock OniOff
b Change ID
Select ab or OK
b Press a or b to choose Lock OniOff.
Press OK.
c Enter your four-digit administrator
password.
Press OK.
Switching Users 2
This setting allows you to switch between
registered restricted users or Public mode
when Secure Function Lock is turned on.
Changing to the restricted user mode
a Hold down Shift and press
Secure Print.
Function Lock
Change ID
a BROTHER
b ABC
Select ab or OK
b Press a or b to choose ID.
Press OK.
c Enter your four-digit password.
Press OK.
Note
• If the current ID is restricted for the
function you want to use,
Access Denied will appear on the LCD
and then the machine will ask you to
confirm your name. If you are allowed to
access the function you want to use, press
a or b to choose your name and enter your
four-digit password.
• If your User ID has a page limit restriction
and you have already reached the
maximum number of pages, the LCD will
show Limit Exceeded when you print
data. Contact your administrator to check
your Secure Function Lock Settings.