Brother MFC-8710DW - Additional Receiving Operations; Printing a Reduced Incoming Fax; Duplex (2-Sided) Printing for FAX Mode

Chapter 4
32
Additional receiving
operations 4
Printing a reduced incoming
fax 4
If you choose On, the machine automatically
reduces each page of an incoming fax to fit on
one page of Letter, A4, Legal or Folio size
paper.
The machine calculates the reduction ratio by
using the page size of the fax and your Paper
Size setting (Menu, 1, 2, 2) and Tray Use for
Fax setting (Menu, 1, 6, 2).
a Make sure you are in FAX mode .
b Press Menu, 2, 1, 5.
21.Setup Receive
5.Auto Reduction
a On
b Off
Select ab or OK
c Press a or b to choose On( or Off).
Press OK.
d Press Stop/Exit.
Duplex (2-sided) printing for
FAX mode 4
Your machine can automatically print
received faxes onto both sides of the paper
when Duplex is set to On.
You can use Letter, Legal or Folio
(8.5 in. × 13 in.) size of paper for this function
[16 to 28 lb (60 to 105 g/m
2
)]
a Make sure you are in FAX mode .
b Press Menu, 2, 1, 9.
21.Setup Receive
9.Duplex
a On
b Off
Select ab or OK
c Press a or b to choose On (or Off).
Press OK.
d Press Stop/Exit.
Note
When Duplex is turned on incoming faxes
will automatically be reduced to fit the size
of paper in the paper tray.