Brother MFC-8710DW - Setting Lock

Security features
11
2
Changing to the Public mode
After a restricted user has finished using the
machine, it will return to the Public setting
within the same time as the Mode Timer
setting (Menu, 1, 1). (See Mode Timer
uu page 6.) You can also exit from the
restricted user mode by pressing the current
Mode key you are in. Then LCD will ask you
Go to Public?.
Press 1 to choose 1.Yes.
Note
If the function you want to use is restricted
for all users, Not Available will appear
on the LCD and the machine will go back
to the Ready mode. You cannot access
the function you want to use. Contact your
administrator to check your Secure
Function Lock Settings.
Setting Lock 2
Setting Lock lets you set a password to stop
other people from accidentally changing your
machine settings.
Make a careful note of your password. If you
forget it, you will have to reset the passwords
stored in the machine. Please call your
administrator or Brother Customer Service.
While Setting Lock is On, you cannot change
the settings without a password. You can only
change the following Fax transmission
settings that are in the FAX menu (Menu, 2,
2).
 Contrast
 Fax Resolution
 Delayed Fax
 Real Time TX
 Polled TX
 Overseas Mode
Machine settings cannot be changed using
the Remote Setup while Setting Lock is On.