Brother MFC-8710DW - Printing a Fax from the Memory; Receiving Faxes into Memory When the Paper Tray Is Empty

Chapter 4
34
Printing a fax from the
memory 4
If you are using the Fax Storage feature
(Menu, 2, 5, 1), you can still print a fax from
the memory when you are at your machine.
(See Fax Storage uu page 27.)
a Press Menu, 2, 5, 3.
25.Remote Fax Opt
3.Print Fax
Press Start
b Press Start.
c Press Stop/Exit.
Receiving faxes into memory
when the paper tray is empty 4
As soon as the paper tray becomes empty
during fax reception, the LCD shows
No Paper and begins receiving faxes into
the machine’s memory. Put some paper in
the paper tray. (See Basic User's Guide:
Loading paper and print media.)
The machine will carry on receiving the fax,
with the remaining pages being stored in the
memory, if enough memory is available.
Incoming faxes will continue to be stored in
the memory until the memory becomes full or
paper is loaded in the paper tray. When the
memory is full the machine will stop
automatically answering calls. To print the
faxes, put fresh paper in the tray.