Brother MFC-8710DW - Retrieving Fax Messages; Changing the Fax Forwarding Number

Chapter 4
30
Retrieving fax messages 4
a Dial your fax number from a telephone
or another fax machine using touch
tone.
b When your machine answers,
immediately enter your Remote Access
Code (3 digits followed by l). If you hear
one long beep, you have messages.
c When you hear two short beeps, use the
dial pad to press 9 6 2.
d Wait for a long beep, and then use the
dial pad to enter the number of the
remote fax machine where you want
your fax messages sent, followed by ##
(up to 20 digits).
e Replace the handset after you hear your
machine beep. Your machine will call
the remote machine, which will then
print your fax messages.
Note
You can insert a pause in a fax number by
using the # key.
Changing the Fax Forwarding number4
You can change the default setting of your fax
forwarding number from another telephone or
fax machine using touch tone.
a Dial your fax number from a telephone
or another fax machine using touch
tone.
b When your machine answers, enter
your Remote Access Code (3 digits
followed by l). If you hear one long
beep, you have messages.
c When you hear two short beeps, use the
dial pad to press 9 5 4.
d Wait for a long beep, and then use the
dial pad to enter the new number of the
remote fax machine where you want
your fax messages forwarded followed
by ## (up to 20 digits).
e Press 9 0 to reset the machine when you
have finished.
f Replace the handset after you hear your
machine beep.
Note
You can insert a pause in a fax number by
using the # key.