Brother MFC-8710DW - 1 General Setup; Important Note; Memory Storage; Volume Settings

1
1
1
IMPORTANT NOTE 1
 Most of the illustrations in this User’s
Guide show the MFC-8910DW.
Memory storage 1
Your menu settings are stored permanently,
and in the event of a power failure will not be
lost. Temporary settings (for example,
Contrast, Overseas Mode) will be lost. Also,
during a power failure the machine will retain
the date and time and programed fax timer
jobs (for example, Delayed Fax) for
approximately 60 hours. Other fax jobs in the
machine's memory will not be lost.
Volume settings 1
Ring volume 1
You can choose a ring volume level from a
range of settings, from High to Off.
While in FAX mode press or to adjust
the volume level. The LCD will show the
current setting, and each key press will
change the volume to the next level. The
machine will keep the new setting until you
change it.
You can also change the ring volume through
the menu:
a Press Menu, 1, 3, 1.
13.Volume
1.Ring
a Med
b High
Select ab or OK
b Press a or b to choose Low, Med, High
or Off.
Press OK.
c Press Stop/Exit.
General Setup 1