Brother MFC-8860DN - Page 36

Chapter 4
26
Setting up restricted users 4
You can set up users with restrictions and a
password.
a Press Menu, 1, 9, 2.
19.Security
2.Function Lock
a Lock OffiOn
b Set Password
Select
ab & OK
b Press a or b to select Setup User.
Press OK.
c Enter the Administrator password.
Press OK.
19.Security
Setup User
a Public
b User01
Select ab & OK
d Press a or b to select User01.
Press OK.
e Use the dial pad to enter the user name.
(See Entering Text on page 146.)
Press OK.
f Enter a four-digit password for the user.
Press OK.
g Press a or b to select Enable or
Disable for Fax Tx. Press OK.
After you have set Fax Tx, repeat this
step for Fax Rx, Copy and Scan.
Press OK.
h Repeat d to g for entering each
additional user and password.
i Press Stop/Exit.
Turning Secure Function Lock on/off 4
If you enter the wrong password when
following the instructions below, the LCD will
show Wrong password. Re-enter the
correct password.
Turning Secure Function Lock on 4
a Press Menu, 1, 9, 2.
19.Security
2.Function Lock
a Lock OffiOn
b Set Password
Select ab & OK
b Press a or b to select Lock OffiOn.
Press OK.
c Enter your four-digit administrator
password. Press OK.
Turning Secure Function Lock off 4
a Press Menu, 1, 9, 2.
19.Security
2.Function Lock
a Lock OniOff
b Set Password
Select ab & OK
b Press a or b to select Lock OniOff.
Press OK.
c Enter your four-digit administrator
password. Press OK.
Downloaded from ManualsPrinter.com Manuals