Brother MFC-9330CDW - Page 101

Routine maintenance
91
A
f Slide each toner cartridge and drum unit
assembly into the machine, making sure
you match the toner cartridge colors to
the same color labels on the machine.
BK = Black, C = Cyan,
M = Magenta, Y= Yellow
g Close the top cover of the machine.
Resetting the belt unit counter A
When you replace a belt unit with a new one,
you will must reset the belt unit counter by
completing the following steps:
a Press to interrupt the error.
b Press .
c Press All Settings.
d Swipe up or down, or press a or b to
display Machine Info..
e Press Machine Info..
f Press Parts Life.
g Touch the dial pad area to light up the
LEDs.
h Press # until the Touchscreen message
changes.
i Press Belt Unit.
j Press Yes.
k Press .
BK
C
M
Y