Brother MFC-9330CDW User Manual

Troubleshooting
107
B
Transferring your faxes or Fax
Journal report B
If the Touchscreen shows:
 Print Unable XX
 Scan Unable XX
We recommend transferring your faxes to
another fax machine or to your computer (see
Transferring faxes to another fax machine
on page 107 or Transferring faxes to your
computer on page 108).
You can also transfer the Fax Journal report
to see if there are any faxes you must transfer
(see Transferring the Fax Journal report to
another fax machine on page 108).
NOTE
If there is an error message on the
Touchscreen after the faxes have been
transferred, disconnect the machine from
the power source for several minutes, and
then reconnect it.
Transferring faxes to another fax
machine B
If you have not set up your Station ID, you
cannot enter fax transfer mode (see Quick
Setup Guide: Set your Station ID).
a Press to interrupt the error
temporarily.
b Press .
c Press All Settings.
d Swipe up or down, or press a or b to
display Service.
e Press Service.
f Press Data Transfer.
g Press Fax Transfer.
h Do one of the following:
 If the Touchscreen shows No Data,
there are no faxes left in the
machine’s memory. Press Close.
 Enter the fax number to which faxes
will be forwarded.
i Press Fax Start.

Brother MFC-9330CDW Specifications

Print Specifications

print speed black	up to 23 ppm
print speed color	up to 23 ppm
print resolution	up to 600 x 2400 dpi

Copy Specifications

copy speed black	up to 23 cpm
copy speed color	up to 23 cpm
copy resolution	600 x 600 dpi

Scan Specifications

scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi
document glass size	8.5” x 11.7”

Fax Specifications

fax modem speed	33.6k bps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
standard paper capacity	250 sheets

Power and Energy

deep sleep mode power consumption	<2W
automatic duplex printing	Yes
energy star qualified	Yes