Brother MFC-9330CDW - Changing the Default Settings for Direct Print

Printing data from a USB Flash memory drive or digital camera supporting mass storage
61
10
Changing the default settings
for direct print 10
You can change the default settings for Direct
Print.
a Connect your USB Flash memory drive
or digital camera to the USB direct
interface on the front of the machine.
b Press Direct Print.
c Press DefaultSettings.
d Swipe up or down, or press a or b to
display the setting you want.
Press the setting.
e Press the new option you want. Repeat
steps d and e for each setting you
want to change.
f Press OK.
g Press .