EasyManua.ls Logo

Brother MFC-9330CDW - Page 116

Brother MFC-9330CDW
217 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
106
Unusable Device
Remove the Device.
Turn the power off
and back on again.
A defective USB device or a
high power consumption USB
device has been connected to
the USB direct interface.
Unplug the device from the USB direct
interface. Press and hold down to turn the
machine off, and then turn it on again.
Unusable Device A USB device or USB Flash
memory drive that is encrypted
or not supported has been
connected to the USB direct
interface.
Unplug the device from the USB direct
interface (see the specifications for supported
USB Flash memory drives in Printing data from
a USB Flash memory drive or digital camera
supporting mass storage on page 58).
USB Access Error The device was removed from
USB direct interface while
accessing the USB device.
Press Close. Reinsert the device and try to
store the scanned data to the device.
USB
Write-protected
The protect switch of the USB
Flash memory drive is on.
Turn off the protect switch of the USB Flash
memory drive.
WT Box End Soon The waste toner box is near the
end of its life.
Buy a new waste toner box before you get a
Replace WT Box message.
Error Message Cause Action

Table of Contents

Other manuals for Brother MFC-9330CDW

Related product manuals