Brother MFC-9330CDW User Manual

Troubleshooting
103
B
Out of Memory The machine’s memory is full. Fax sending or copy operation in progress
Do one of the following:
 Press Send Now, Partial Print or
Quit to send or copy the scanned pages.
 Press and wait until the other
operations in progress finish, and then try
again.
 Clear the faxes from the memory.
Print the faxes that are stored in the
memory to restore the memory to 100%.
Then turn off Fax Storage to avoid storing
more faxes in the memory (see Advanced
User's Guide: Printing a fax from the
memory and Fax Storage).
Print operation in process
Do one of the following:
 Reduce the print resolution.
(See Software User's Guide.)
 Clear the faxes from the memory (see the
above explanation).
Out of Memory
Secure Print Data
is full. Press
Stop Key and
delete the
previously stored
data.
The machine’s memory is full.
Press and delete the previously stored
secure print data.
Print Unable XX The machine has a mechanical
problem.
Do one of the following:
 Press and hold down to turn the
machine off, wait a few minutes, and then
turn it on again (see Transferring your faxes
or Fax Journal report on page 107).
 If the problem continues, call Brother
Customer Service.
Error Message Cause Action

Brother MFC-9330CDW Specifications

Print Specifications

print speed black	up to 23 ppm
print speed color	up to 23 ppm
print resolution	up to 600 x 2400 dpi

Copy Specifications

copy speed black	up to 23 cpm
copy speed color	up to 23 cpm
copy resolution	600 x 600 dpi

Scan Specifications

scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi
document glass size	8.5” x 11.7”

Fax Specifications

fax modem speed	33.6k bps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
standard paper capacity	250 sheets

Power and Energy

deep sleep mode power consumption	<2W
automatic duplex printing	Yes
energy star qualified	Yes