Brother MFC-9330CDW - Page 158

148
Fax
(continued)
Setup Receive
(continued)
Memory Receive — Off*
Fax Forward
Fax Storage
PC Fax Receive
Set the machine to
forward fax
messages, to call
your pager or cell
phone, to store
incoming faxes in the
memory (so you can
retrieve them while
you are away from
your machine), or to
send faxes to your
computer.
See .
(Backup Print) If you chose
Fax Forward or
PC-Fax Receive, you
can turn on the
Backup Print safety
feature.
Anti-Junk Fax — Register Register up to 100
fax/telephone
numbers to the fax
blocking list.
Delete Delete registered
fax/telephone
numbers from the fax
blocking list.
Print Reports Print a list of
registered
fax/telephone
numbers in the fax
blocking list.
Print Density — Make printouts
darker or lighter.
Fax Rx Stamp — On
Off*
Print the received
time and date on the
top of the received
faxes.
2-sided — On
Off*
Print received faxes
on both sides of the
paper.
Setup Send Batch TX — On
Off*
Combine delayed
faxes going to the
same fax number at
the same time of day
into one
transmission.
Level 1 Level 2 Level 3 Level 4 Options Descriptions
See Page
See Advanced User's Guide.
The factory settings are shown in Bold with an asterisk.
*