Brother MFC-9330CDW - Page 164

154
Network
(continued)
Wired LAN
(continued)
Wired Enable ——On*
Off
Enable or Disable
the Wired LAN
manually.
WLAN TCP/IP
BOOT Method — Auto*
Static
RARP
BOOTP
DHCP
Choose the BOOT
method that best
suits your needs.
(IP Boot
Tries)
— 3*
[00000-32767]
Specifies the
number of attempts
the machine will try
to obtain an IP
address when the
BOOT Method is
set to any setting
except Static.
IP Address — [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP
address.
Subnet Mask — [000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet
mask.
Gateway — [000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway
address.
Node Name —
BRWXXXXXXXXXXXX Enter the Node
name.
(Up to 32
characters)
WINS Configuration — Auto*
Static
Chooses the WINS
configuration mode.
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions
See Network User's Guide.
Visit the Brother Solutions Center to download the Wi-Fi Direct™ Guide at http://solutions.brother.com/.
Visit the Brother Solutions Center to download the Web Connect Guide at http://solutions.brother.com/
.
The factory settings are shown in Bold with an asterisk.