Brother MFC-9330CDW - Page 194

184
Toner C
Wi-Fi Setup C
NOTE
After Wi-Fi is set up, you cannot change the settings from your Home screen. Change the
settings for Wi-Fi in the Settings screen.
Level 1 Level 2 Level 3 Options Descriptions See Page
Toner Life — — View the approximate
remaining toner life
for each color.
See .
Test Print — — Print the Test Print
page.
Calibration Calibrate Yes
No
Adjust the color
density or returns the
color calibration to the
factory settings.
Reset Yes
No
Auto Regist. — Yes
No
Adjust the print
position of each color
automatically.
See Software User's Guide.
The factory settings are shown in Bold with an asterisk.
Level 1 Level 2 Level 3 Options Descriptions
See Page
Setup Wizard — — Configure your
internal print server.
See .
Setup with PC — — Configure the Wi-Fi
settings using a
computer.
WPS/AOSS — — Easily configure your
wireless network
settings using the
one-button push
method.
WPS w/PIN Code — — Easily configure your
wireless network
settings using WPS
with a PIN code.
See Software User's Guide.
The factory settings are shown in Bold with an asterisk.