EasyManuals Logo

Brother MFC-9330CDW User Manual

Brother MFC-9330CDW
217 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #93 background imageLoading...
Page #93 background image
Routine maintenance
83
A
Drum End SoonX A
If only a specified drum is near the end of its
life, the Touchscreen shows the
Drum End SoonX message. The X indicates
the drum unit color that is near the end of its
life. (BK=Black, C=Cyan, M=Magenta,
Y=Yellow ). We recommend you keep
genuine Brother drum units ready for
installation. Buy a new drum unit
DR-261CL-BK (for Black) or a
DR-261CL-CMY (for either C, M, Y color) and
have it ready before you get a
Replace DrumX message.
Replace DrumX A
If only a specified drum needs to be replaced,
the Touchscreen shows the
Replace DrumX message. The X indicates
the drum unit color that you must replace.
(BK=Black, C=Cyan, M=Magenta, Y=Yellow )
The drum unit has exceeded its rated life.
Replace the drum unit with a new one. We
recommend a genuine Brother drum unit be
installed at this time.
After replacement, reset the drum counter by
following the instructions included with the
new drum unit (see Resetting the drum
counter on page 88).
Drum Stop A
We cannot guarantee the print quality.
Replace the drum unit with a new one. We
recommend a genuine Brother drum unit be
installed at this time.
After replacement, reset the drum counter by
following the instructions included with the
new drum unit (see Resetting the drum
counter on page 88).
Replacing the drum units A
IMPORTANT
While removing the drum unit, handle it
carefully because it may contain toner. If
toner scatters on your hands or clothes,
wipe or wash it off with cold water at once.
Every time you replace the drum unit,
clean the inside of the machine
(see Advanced User's Guide: Cleaning
and checking the machine).
DO NOT unpack the new drum unit until
you are ready to install it. Exposure to
direct sunlight (or room light for long
periods of time) may damage the drum
unit.
a Make sure the machine is turned on.
b Open the top cover until it locks in the
open position.

Table of Contents

Other manuals for Brother MFC-9330CDW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-9330CDW and is the answer not in the manual?

Brother MFC-9330CDW Specifications

Print Specifications IconPrint Specifications
print speed blackup to 23 ppm
print speed colorup to 23 ppm
print resolutionup to 600 x 2400 dpi
Copy Specifications IconCopy Specifications
copy speed blackup to 23 cpm
copy speed colorup to 23 cpm
copy resolution600 x 600 dpi
Scan Specifications IconScan Specifications
scan resolution optical1200 x 2400 dpi
scan resolution interpolated19200 x 19200 dpi
document glass size8.5” x 11.7”
Fax Specifications IconFax Specifications
fax modem speed33.6k bps
fax page memoryup to 500 pages
speed dial locations200
Paper Handling IconPaper Handling
auto document feeder capacityup to 35 pages
paper size maximumup to 8.5” x 14” (legal)
standard paper capacity250 sheets
Power and Energy IconPower and Energy
deep sleep mode power consumption<2W
automatic duplex printingYes
energy star qualifiedYes

Related product manuals