Brother MFC-9660 - Chapter 16: Using the Brother MFC with Macintosh; Macintosh Setup and Printer Driver

Using the Brother MFC with a New Power Macintosh
®
G3, G4 or iMac
™
/iBook
™
110
PRINTER/SCANNER
16 U sing the Brother MFC with a New Power Macintosh
®
G3, G4 or iMac
™
/iBook
™
Set up Your USB Equipped Apple
®
Macintosh
®
G3, G4 or iMac
™
with
Mac OS 8.5/8.5.1/8.6/9.0/9.0.4/9.1
To work with the machine, your USB-Equipped Apple
®
Macintosh
®
must be set up with Mac OS
8.5/8.5.1/8.6/9.0/9.0.4/9.1. (The Brother Scanner Driver works only with Mac OS 8.6/9.0/9.0.4/9.1.)
Using Brother Printer Driver with your
Apple
®
Macintosh
®
To select the Printer:
1 From the Apple menu, open the Chooser.
2 Click the HL-1200/MFL Pro icon. On the right side of the Chooser, click the printer to which
you want to print. Close the Chooser.
Before you can connect the machine to your Macintosh
®
, you must purchase a
USB cable that is no longer than 6 feet (1.8 meters).