Brother MFC-9660 - Storing Numbers

iv
Storing Numbers
Storing One Touch Dial Numbers
1 Press Menu , 2, 3, 1 .
2 Press the One Touch Key where you want to
store the number.
3 Enter a number (up to 20 digits), and then
press
Set .
4 Enter a name (or leave it blank), and then
press Set.
5 Press Stop/Exit.
Storing Speed Dial Numbers
1 Press Menu, 2, 3, 2.
2 Enter a two-digit Speed Dial number, and
then press Set.
3 Enter a number (up to 20 digits), and then
press Set.
4 Enter a name (or leave it blank), and then
press Set.
5 Press Stop/Exit.
Dialing Operation
One Touch Dialing/Speed Dialing
1 Place the original face down in the
Automatic Document Feeder.
2 Press the One Touch Key of the number you
want to call—OR—Press Search/Speed
Dial, press #, and then press the two-digit
Speed Dial number.
3 Press Fax Start.
Search Dialing
1 Place the original face down in the
Automatic Document Feeder.
2 Press Search/Speed Dial, then enter the
first letter of the name you're looking for.
3 Press or to search the memory.
4 Press Fax Start, when the LCD shows the
name you want to call.
Making Copies
Making Single Copy
1 Place the original face down in the
Automatic Document Feeder.
2 Press Copy.
Sorting Multiple Copies.
1 Place the original face down in the
Automatic Document Feeder.
2 Use the dial pad to enter the number of
copies you want (up to 99).
3 Press Options, press or to select
STACK/SORT, and then press Set.
Press or to select SORT, and then
press Set.
4 Press Copy.