EasyManua.ls Logo

Brother MFC-9660 - Chapter 11: Using the machine as a Printer Continued

Brother MFC-9660
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
57 Chapter 11
Two-Sided Printing (Manual Duplexing)
The supplied printer driver for Windows
®
95, 98, 98SE, Me, and for Windows NT
®
Workstation
Version 4.0 enables manual duplex printing. (For more information, see the Help screen for the
printer driver.)
The machine prints all the even-numbered pages on one side of the paper first. Then, the Windows
®
driver instructs you (with a pop-up message) to reinsert the paper. Before reinserting the paper,
straighten it well, or you may get a paper jam. Very thin or very thick paper is not recommended.
Manual Feed Slot
The machine has a manual feed slot above the paper tray. You can load envelopes and special print
media one at a time into this slot. You do not have to remove paper from the paper tray. (See
Acceptable Paper, page 62)
Use the manual feed slot to print or copy on labels, envelopes, organizer paper, card stock or thicker
paper. (See Printing on Thicker Paper and Card Stock, page 59)
When you use the manual duplex function, it is possible that a paper jam
may occur or the printer quality might not be satisfactory.
If you use labels and envelopes, they must be of a type suitable for use with a laser
printer. If you use incorrect types, it is possible to damage or contaminate the drum
surface and cause printing problems.

Table of Contents

Other manuals for Brother MFC-9660

Related product manuals