Brother MFC-9660 - Quick Reference Guide; Sending Faxes; Receiving Faxes

iii
Quick Reference Guide
Sending Faxes
Automatic Transmission
1 Place the original face down in the
Automatic Document Feeder.
2 Enter the fax number using One Touch,
Speed Dial, Search or the dial pad.
3 Press Fax Start .
Sending a Cover Page
1 Place the original face down in the
Automatic Document Feeder.
2 Press Menu, 2, 2, 7 .
3 When NEXT FAX ONLY appears, press
Set .
4 Press or to select ON (or OFF ), and
then press
Set .
5 Press or to select a comment and
then press
Set .
6 Enter two digits to indicate the number of
pages being sent, and then press
Set .
7 Press 1 to select additional settings
—
OR —Press 2 if you are ready to fax.
8 Enter the fax number.
9 Press Fax Start .
Real Time Transmission
You can send faxes in real time.
1 Place the original face down in the
Automatic Document Feeder.
2 Press Menu, 2, 2, 5 .
3 Press or to select ON , and then press
Set
— OR —
For the next transmission only press or
to select
NEXT FAX ONLY , and then
press
Set .
4 For the next fax only, press or to
select
ON , and then press Set .
5 Press 1 to select additional settings
—
OR —Press 2 if you are ready to fax.
6 Enter the fax number.
7 Press Fax Start .
Receiving Faxes
Select Receive Mode
There are four different receive modes:
FAX/TEL , TAD , MANUAL and FAX . Press
Mode repeatedly until the FAX and FAX/TEL
(F/T)
light shows your selection.
To select
FAX/TEL or MANUAL as your
receive mode, you will need to connect an
external telephone. (Make sure you set Ring
Delay and F/T Ring Time when the
FAX/TEL
is selected.)
For Thai, Arabic, Indonesian, Cantonese, please refer to Quick Reference Guide enclosed
in the carton box.