ADVANCED FAX USE
Advanced Sending 40
Switching Memory Security ON
1
Press Menu, 2, 0, 1.
2
Press or to choose SET SECURITY.
3
Press Set.
The screen prompts you to enter the password.
4
Enter a 4-digit password, followed by Set.
This is the same as the security password of the
machine already stored.
The screen displays ACCEPTED for 2 seconds, followed by SECURE MODE - Memory Security
is now switched ON.
Switching OFF Memory Security
1
When Memory Security is switched ON, press Menu.
2
Enter a 4-digit password and press Set.
The screen displays ACCEPTED, then after 2 seconds the
display reverts to normal. Memory Security is now switched OFF. Then all the data saved in the
memory will be printed out.
If you forget the Memory Security password, please contact your Brother dealer for service or the
help number given with the warranty documentation.
If the password you enter at Step 4 is incorrect, the screen would display WRONG
PASSWORD. After 2 seconds the display will then return to normal (displaying the
date & time). You must then start from Step 1 to set Memory Security.
If the password you enter at Step 2 is incorrect, the screen would display WRONG
PASSWORD. After 2 seconds the display will then return to displaying SECURE
MODE. You must then start from Step 1 to switch OFF Memory Security.
PASSWORD:XXXX
ENTER & SET KEY
PASSWORD:XXXX
ENTER & SET KEY
To Next Page
Loading...
