Brother MFC-9660 - Chapter 7: Advanced Receiving Continued; Remote Activation and Code Management

ADVANCED FAX USE
Advanced Receiving 42
Switching ON Remote Activation and Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset Activation Code is 5 1.
The preset Deactivation Code is # 5 1.
To switch Remote Activation ON and change Remote Codes
1 Press Menu, 2, 1, 4.
2 Press or to select ON (or OFF), and press Set when the screen displays the setting you
want.
3 If you want to, enter a new Remote Activation Code, then press Set.
4 If you want to, enter a new Remote Deactivation Code, then press Set.
5 Press Stop/Exit.
If you are always disconnected when accessing your external TAD remotely, try
changing the Activation Code from 5 1 to # # # and the Deactivation Code from
# 5 1 to 1 1 1. You cannot use the same number for the Activation Code, the
Deactivation Code and the Remote Access Code.