Brother MFC-9840CDW - For Wired Network Interface Users

To Next Page

To Previous Page

Installing the Driver & Software

STEP 2

Macintosh

Wired

Network

For Wired Network Interface Users

For Mac OS

X 10.2.4 or greater

Important

Make sure that you have finished the

instructions from step 1 Setting Up the

Machine on pages 4 through 11.

1 Connect the network interface cable to the

machine, and then connect it to your network.

Note

Make sure that the machine is turned on by

connecting the power cord.

2 Turn on your Macintosh

3 Put the supplied CD-ROM into your CD-ROM

drive.

4 Double-click the Start Here OSX icon to install.

Follow the on-screen instructions.

Note

Please see the Network User’s Guide on the CD-

ROM to install the PS driver.

5 Choose Wired Network Connection

(Ethernet), and then click Next.

Note

Please wait, it will take a few seconds for the

software to install. After the installation, click

Restart to finish installing the software.

Other manuals for Brother MFC-9840CDW