Brother MFC-J2310

132
Network
(Continued)
Wi-Fi Direct
(Continued)
Device
Information
Device Name — You can see the
device name of
your machine.
See .
SSID — Shows SSID of
Group Owner.
When the
machine is not
connected,
Touchscreen
shows
Not Connected .
IP Address — You can see the
current IP
address of your
machine.
Status
Information
Status G/O Active
(**)
Client Active
Not Connected
Off
** = the number
of devices
You can see the
current Wi-Fi
Direct™ network
status.
Signal Strong
Medium
Weak
None
You can see the
current Wi-Fi
Direct™ network
signal strength.
When your
machine acts as
Group Owner,
the Touchscreen
always shows
Strong.
I/F Enable — On
Off*
Enable or
Disable the Wi-Fi
Direct™
connection.
Level1 Level2 Level3 Level4 Options Descriptions Page
See Network User’s Guide.
Go to the Brother Solutions Center to download the Wi-Fi Direct™ Guide at http://solutions.brother.com/
.
Go to the Brother Solutions Center to download the Web Connect Guide at http://solutions.brother.com/
.
The default settings are shown in Bold with an asterisk.