Brother MFC-J2310

General information
13
1
Beeper Volume 1
When the beeper is on, the machine will beep
when you press a key, make a mistake, or
after you send or receive a fax.
You can choose a range of beeper volume
levels, from High to Off.
a Press (Settings).
b Press s or t on the Touchpanel to
display General Setup.
c Press General Setup.
d Press s or t to display Volume.
e Press Volume.
f Press s or t to display Beep.
g Press Beep.
h Press s or t to display Low, Med, High
or Off, and then press the option you
want to set.
i Press .
Speaker Volume 1
You can choose a range of speaker volume
levels, from High to Off.
a Press (Settings).
b Press s or t on the Touchpanel to
display General Setup.
c Press General Setup.
d Press s or t to display Volume.
e Press Volume.
f Press s or t to display Speaker.
g Press Speaker.
h Press s or t to display Low, Med, High
or Off, and then press the option you
want to set.
i Press .
You can also adjust the speaker volume by
pressing Hook.
a Press (Fax).
b Press Hook.
c Press or on the Touchpanel.
d Press .
e Press or on the
Touchscreen.
Each press changes the volume to the
next setting.
f Press .
g Press Hook.