Telephone and external devices
55
6
1TAD
2 Protective Cap
When the TAD answers a call, the
Touchscreen shows Telephone.
DO NOT connect a TAD elsewhere on the
same telephone line.
Connections settings 6
The external TAD must be connected as
shown in the previous illustration.
a Using both hands, use the finger holds
on each side of the machine to lift the
scanner cover into the open position.
b Carefully guide the telephone line cord
into the cable channel and out the back
of the machine.
c Lift the scanner cover to release the
lock. Gently push the scanner cover
support down and close the scanner
cover using both hands.
d Set your external TAD to one or two
rings. (The machine's Ring Delay setting
does not apply.)
e Record the outgoing message on your
external TAD.
f Set the TAD to answer calls.
g Set the Receive Mode to
External TAD. (See Choose the
Receive Mode on page 42.)
1
1
2
(Example for Australia)
To Next Page
Loading...
