Chapter 6
54
Setting the Caller ID to On
(For Taiwan)
6
If you have Caller ID on your line, then this
function should be set to On to display the
caller's telephone number on the
Touchscreen as the telephone rings.
a Press (Settings).
b Press s or t to display Fax.
c Press Fax.
d Press s or t to display
Miscellaneous.
e Press Miscellaneous.
f Press Caller ID.
g Press On (or Off).
h Press .
(For Taiwan)
Please note that Brother machines
support DTMF in Taiwan market instead
of FSK-US & FSK-UK.
Connecting an external
TAD (telephone
answering device)
6
You may choose to connect an external
answering device. However, when you have
an external TAD on the same telephone line
as the machine, the TAD answers all calls
and the machine “listens” for fax calling
(CNG) tones. If it hears them, the machine
takes over the call and receives the fax. If it
does not hear CNG tones, the machine lets
the TAD continue playing your outgoing
message so your caller can leave a voice
message.
The TAD must answer within two rings (the
recommended setting is two rings). The
machine cannot hear CNG tones until the
TAD has answered the call, and with four
rings, there are only 8 to 10 seconds of CNG
tones left for the fax “handshake”. Make sure
you carefully follow the instructions in this
guide for recording your outgoing message.
We do not recommend using the toll saver
feature on your external answering machine if
it exceeds five rings.
If you do not receive all your faxes,
shorten the Ring Delay setting on your
external TAD.
To Next Page
Loading...
Need help?
General
