Brother MFC-J2310

Loading documents
37
3
c Adjust the paper guides (1) to fit the
width of your documents.
d Place your documents face down, top
edge first in the ADF underneath the
guides until you feel them touch the feed
rollers.
The Touchscreen will display
ADF Ready.
IMPORTANT
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
Using the scanner glass 3
You can use the scanner glass to fax, copy or
scan single pages or pages of a book.
Document Sizes Supported 3
How to load documents 3
NOTE
(MFC-J4410DW and MFC-J4610DW)
To use the scanner glass, the ADF must
be empty.
a Lift the document cover.
b Using the document guidelines on the
left and top, place the document
face down in the upper left corner of the
scanner glass.
1 document cover
c Close the document cover.
Length: Up to 297 mm
Width: Up to 215.9 mm
Weight: Up to 2 kg
1
1