What does 'Ink Absorber Pad NearFull' mean on my Brother MFC-J2320?
The message 'Ink Absorber Pad NearFull' on your Brother All in One Printer indicates that the ink absorber box or flushing box is nearly full and must be replaced soon. Contact Brother customer service or your local Brother dealer.
What does 'Comm. Error' mean on my Brother MFC-J2320 All in One Printer?
The 'Comm. Error' message on your Brother All in One Printer indicates that poor telephone line quality caused a communication error. Send the fax again or connect the machine to another telephone line. If the problem continues, call the telephone company and ask them to check your telephone line.
What does 'Ink Absorber Pad Full' mean on my Brother MFC-J2320?
The message 'Ink Absorber Pad Full' on your Brother All in One Printer indicates that the ink absorber box or flushing box is full and must be replaced. Contact Brother customer service or your local Brother Authorised Service Centre to have your machine serviced.
Why does my Brother All in One Printer say 'Low Temperature'?
Your Brother All in One Printer displays 'Low Temperature' because the room temperature is too low. After increasing the room temperature, allow the machine to warm up to room temperature. Try again when the machine has warmed up.
Why does my Brother MFC-J2320 say 'High Temperature'?
Your Brother All in One Printer displays 'High Temperature' because the room temperature is too high. After lowering the room temperature, allow the machine to cool down to room temperature. Try again when the machine has cooled down.
What does 'Wrong Ink Colour' mean on my Brother MFC-J2320?
The message 'Wrong Ink Colour' on your Brother All in One Printer means that an ink cartridge has been installed in the wrong position. Check which ink cartridges are not matched by colour to their ink cartridge positions and move them to their correct positions.
How to fix 'No Paper Fed' error on my Brother MFC-J2320 All in One Printer?
The 'No Paper Fed' error on your Brother All in One Printer can occur for several reasons: * The machine is out of paper, or paper is not correctly loaded in the paper tray: Refill or reload the paper. * The paper tray was not fully inserted: Reinstall the paper tray until it locks into place. * The paper was not inserted in the centre position of the manual feed slot: Re-insert it in the centre of the manual feed slot. * The Jam Clear Cover is not closed correctly: Make sure the Jam Clear Cover is closed evenly at both ends. * Paper dust has accumulated on the surface of the paper pick-up rollers: Clean the paper pick-up rollers. * The paper is jammed in the machine: Remove the jammed paper.
How to fix 'Touchscreen Init. Failed' error on my Brother All in One Printer?
The 'Touchscreen Init. Failed' error on your Brother All in One Printer can occur if the Touchscreen was pressed before the power on initialisation was completed. Ensure that nothing is touching or resting on the Touchscreen, especially when plugging in the machine. Also, debris may be stuck between the lower part of the Touchscreen and its frame, so insert a piece of stiff paper between the lower part of the Touchscreen and its frame and slide it back and forth to push out the debris.
What does 'Data Remaining in Memory' mean on Brother All in One Printer?
The message 'Data Remaining in Memory' on your Brother All in One Printer means that print data is left in the machine's memory. Press the button to cancel the job and clear it from the memory. Then, try to print again.
What does 'Wrong Paper' mean on my Brother MFC-J2320 All in One Printer?
The 'Wrong Paper' message on your Brother All in One Printer means that the paper size setting does not match the size of paper in the tray. Ensure that the paper size selected on the Touchscreen matches the paper in the tray, load the paper in the proper orientation, and set the paper guides to the indicators for your paper size. After checking these settings, press OK on the Touchscreen.
General| Print Technology | Inkjet |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Connectivity | USB, Ethernet, Wi-Fi |
| Max Print Resolution | 6000 x 1200 dpi |
| Max Print Size | A3 |
| Scanner Type | Flatbed with ADF |
| Max Scan Resolution | 1200 x 2400 dpi |
| Copy Speed (Black) | 12 cpm |
| Copy Speed (Color) | 9 cpm |
| Paper Tray Capacity | 250 sheets |
| Mobile Printing | Brother iPrint&Scan, AirPrint, Google Cloud Print |
| Display | 2.7" LCD touchscreen |
| Paper Handling | A3, A4 |
Load up to 250 pages in the large-capacity tray for versatile paper handling.
Guidance on accessing frequently asked questions and troubleshooting resources.
Step-by-step instructions for loading paper into the paper tray.
Instructions for loading documents into the Automatic Document Feeder (ADF).
Step-by-step guide on printing documents from a computer.
Instructions on how to perform copying tasks using the machine.
How to scan documents to a PDF file using ControlCenter4 software.
Operations for printing photos directly from a USB flash drive.
Step-by-step instructions for sending faxes from the machine.
Explanation of available receive modes based on line setup.
Guidance on selecting the correct receive mode for your line.
Procedures for cleaning the scanner glass and ADF unit.
How to check and improve print quality by printing a test sheet.
How to adjust print alignment if text appears blurred or faded.
How to interpret the Wireless LAN report to resolve connection failures.
To Next Page